You will need: chisel, hammer, screwdriver.
1. Disconnect the wire from the terminal «–» battery.
2. Remove the steering wheel (see «Removal and installation of a steering wheel»).
3. Remove paddle shifters (see «Checking and replacing steering column switches»).
4. Loosen the four bolts securing the ignition lock clamp on the steering column. Shear bolt heads. If they are already sheared when installing the lock, remove the bolts by hammering through a thin chisel.
5. Disconnect the ignition switch harness connector.
6. Finally turn out bolts from the case of the switch of ignition and remove the switch from a steering column.
7. Install the lock in the reverse order of removal, having previously sunk the tongue of the anti-theft device. To do this, insert the key into the switch and turn it from the position «0».