1 – main relay of the control system; 2 – relay for switching on the electric fan of the cooling system; 3 – electric fuel pump relay; 4 – Electric fuel pump circuit fuse; 5 – controller fuse; 6 – main relay fuse.
You will need: a screwdriver, an 8 mm wrench.
1. Remove the wire from the "–" terminal of the battery.
2. Remove the right instrument panel center console panel (see "Removal and installation the instrument panel shield").
3. To replace a fuse, remove it from its socket in the fuse box.
4. To replace the relay, unscrew the two nuts securing the relay unit to the instrument panel bracket…
5. …remove the relay block and move it to the side.
6. Remove the relay that needs to be replaced from its socket in the unit.
7. Install the relay, relay box and fuses in the reverse order of removal.