Installation and repair of lubrication system VAZ-1111 Oka
Lubrication system device
The main and connecting rod bearings of the crankshaft and the camshaft bearings are lubricated under pressure. The cylinder walls, pistons and piston rings, piston pins, camshaft...
The main and connecting rod bearings of the crankshaft and the camshaft bearings are lubricated under pressure. The cylinder walls, pistons and piston rings, piston pins, camshaft...
Removal and installation the oil pump
To remove the oil pump, place the car on a lift and apply the parking brake. Remove the windshield washer reservoir, the wire from the negative terminal of the battery, and the...
To remove the oil pump, place the car on a lift and apply the parking brake. Remove the windshield washer reservoir, the wire from the negative terminal of the battery, and the...
Disassembly and assembly of the oil pump
For disassembly, secure the cover 9 (figure 52) pump in a vice and unscrew the plug 6 of the pressure-reducing valve. Take out the spring 5 and valve 4. Unscrew the screws...
For disassembly, secure the cover 9 (figure 52) pump in a vice and unscrew the plug 6 of the pressure-reducing valve. Take out the spring 5 and valve 4. Unscrew the screws...
Checking and repairing the oil pump
After disassembling, all parts are washed in kerosene or gasoline, blown with compressed air and their condition is checked. The aluminum cover in the plane of contact of the...
After disassembling, all parts are washed in kerosene or gasoline, blown with compressed air and their condition is checked. The aluminum cover in the plane of contact of the...
Flushing of crankcase ventilation parts
Remove the ventilation hoses, unscrew the fastening nuts and remove the cylinder head cover. Unscrew the fastening screws and remove the oil separator cover. Wash the removed...
Remove the ventilation hoses, unscrew the fastening nuts and remove the cylinder head cover. Unscrew the fastening screws and remove the oil separator cover. Wash the removed...
Oil change
Warm up the engine, unscrew the drain plug and drain the oil into a container. Wait at least 10 minutes for the oil to drain completely. Replace the oil filter and fill in fresh...
Warm up the engine, unscrew the drain plug and drain the oil into a container. Wait at least 10 minutes for the oil to drain completely. Replace the oil filter and fill in fresh...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More articles from other manuals on VAZ cars:
➠ Power unit: Lubrication system VAZ-21011 (1974-1983)
➠ Power unit: Lubrication system VAZ-2121 (1977-1994)
➠ Power unit: Lubrication system VAZ-21051 (1979-2010)
➠ Power unit: Lubrication system VAZ-21011 (1974-1983)
➠ Power unit: Lubrication system VAZ-2121 (1977-1994)
➠ Power unit: Lubrication system VAZ-21051 (1979-2010)
Share with friends:
- General information
- Vehicle description
- Vehicle device
- Vehicle operation
- Maintenance
- Applications
- Power unit
- Engine repair
- Cooling system
- Lubrication system
- Supply system
- Transmission
- Clutch
- Transmission
- Chassis
- Front suspension and wheels
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Electrical equipment
- Engine electrics
- Equipment and devices
- General information
- Introduction to the guide
- User manual
- Maintenance
- Power unit
- Engine repair
- Cooling and lubrication system
- Fuel system
- Exhaust system
- Transmission
- Car gearbox
- Clutch and drive shafts
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and locks
- Electrical equipment
- Equipment and devices
- Lighting and signaling
- Engine electrics
- Ignition system