Engine lubrication system VAZ-21011 «Zhiguli»
Features of the engine lubrication system
Lubrication system 1 – oil pump; 2 – oil pan; 3 – oil supply channel from the pump to the filter; 4 – horizontal channel for supplying oil from the filter to the oil line; 5 –...
Lubrication system 1 – oil pump; 2 – oil pan; 3 – oil supply channel from the pump to the filter; 4 – horizontal channel for supplying oil from the filter to the oil line; 5 –...
Engine oil change
1. The oil must be changed on a hot engine. To completely drain the oil, you must wait at least 10 minutes after opening the drain hole. 2. When changing the oil, you should also...
1. The oil must be changed on a hot engine. To completely drain the oil, you must wait at least 10 minutes after opening the drain hole. 2. When changing the oil, you should also...
Removal and installation the oil pump
1. If only the oil pump needs to be repaired, place the vehicle on a lift or inspection pit, disconnect the wires from the battery and drain the oil from the engine crankcase. 2....
1. If only the oil pump needs to be repaired, place the vehicle on a lift or inspection pit, disconnect the wires from the battery and drain the oil from the engine crankcase. 2....
Disassembly and assembly of the oil pump
Disassembling the oil pump 1 – pressure reducing valve; 2 – spring; 3 – lid; 4 – body; 5 – roller 1. Secure the oil pump carefully in a vice to avoid damaging the housing. 2....
Disassembling the oil pump 1 – pressure reducing valve; 2 – spring; 3 – lid; 4 – body; 5 – roller 1. Secure the oil pump carefully in a vice to avoid damaging the housing. 2....
Checking the oil pump
Basic data for checking the pressure reducing valve spring 1. After disassembling, wash all pump parts with kerosene or gasoline, blow with a stream of compressed air, and then...
Basic data for checking the pressure reducing valve spring 1. After disassembling, wash all pump parts with kerosene or gasoline, blow with a stream of compressed air, and then...
Engine crankcase ventilation
Engine Crankcase Ventilation Diagram A and B – operation of the carburetor spool valve at low crankshaft speed (A) and at high speed (B); 1 – oil separator drain pipe; 2 – oil...
Engine Crankcase Ventilation Diagram A and B – operation of the carburetor spool valve at low crankshaft speed (A) and at high speed (B); 1 – oil separator drain pipe; 2 – oil...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More articles from other manuals on VAZ cars:
➠ Power unit: Lubrication system VAZ-1111 (1988-1996)
➠ Power unit: Lubrication system VAZ-2121 (1977-1994)
➠ Power unit: Lubrication system VAZ-21051 (1979-2010)
➠ Power unit: Lubrication system VAZ-1111 (1988-1996)
➠ Power unit: Lubrication system VAZ-2121 (1977-1994)
➠ Power unit: Lubrication system VAZ-21051 (1979-2010)
Share with friends:
- General information
- Vehicle description
- Vehicle device
- Vehicle operation
- Maintenance
- Main malfunctions
- Applications
- Power unit
- Engine repair
- Cooling and lubrication system
- Supply system
- Transmission
- Clutch
- Transmission
- Cardan gear
- Rear axle
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Electrical equipment
- Engine electrics
- Equipment and devices
- General information
- Specifications
- Operation and maintenance
- Power unit
- Engine repair
- Cooling system
- Lubrication system
- Power and exhaust system
- Ignition system
- Engine electrics
- Transmission
- Clutch
- Car gearbox
- Cardan gear
- Rear axle
- Chassis
- Car suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and locks
- Electrical equipment
- Equipment and devices
- Lighting and signaling