Removal and installation of an upholstery of a door You will need a key "screwdriver". 1. Using a thin screwdriver, pry the lining from the power window handle socket and... 2. ... by sliding the trim of the power window handle,...
Side door glass replacement You will need: keys "for 8", "on 10" screwdriver Remove door trim ( see subsection 9.6.1. ). 1. Remove the protective film from the inside of the door. 2. Install the power window...
Replacing the door window You will need: keys "for 8", "on 10" screwdriver Remove door trim ( see subsection 9.6.1. ) and protective film. 1. Install the power window handle and lower the glass down so...
Side door replacement You will need keys "on 10" And "at 13". 1. Remove the two bolts securing the door stop to the A-pillar. 2. Outline the bolts on the hinges to make it easier to adjust the position...
Side Door Lock Cylinder Replacement You will need: screwdriver pliers Remove door trim ( see subsection 9.6.1. ). 1. Disconnect from the lock draft of its external drive. 2. Remove the locking bracket 1, fixing the...
Replacing the inside handle of the side door lock You will need: screwdriver pliers Remove door trim ( see subsection 9.6.1. ). 1. Remove the two screws securing the inside door handle. 2. Slightly push down the inside door...
Side door lock replacement You will need: screwdriver pliers Remove door trim ( see subsection 9.6.1. ). If the sliding window has been lowered, raise it as far as it will go. 1. Remove the two screws...
Side door lock adjustment You will need: key "on 10" screwdriver hammer The lock is adjusted by changing the position of the latch mounted on the body pillar. 1. Outline the contours of the lock latch (for...
Removal and installation of a back door You will need: keys "for 8", "on 10", "at 13" screwdriver 1. Open the back door. Bend the wire harness holder on the right side of the vehicle body. 2. Disconnect the wire lugs...
Replacing the rear door lock You will need keys "for 8" And "on 10". 1. Outline the rear door lock and... 2. ... unscrew the two nuts securing the lock body and the protective screen to the rear door studs....
Adjustment of position of the lock of a back door You will need keys "for 8" And "on 10". 1. Loosen the two nuts securing the lock housing and the protective screen to the rear door studs. 2. By moving the lock body, achieve...