Rear suspension of cars VAZ-11113 «Ока»

Replacing the shock absorber
You will need: wrenches "13", "19", a special wrench for holding the shock absorber rod or an open-end wrench "8" suspension spring tensioner Warning! Before removing the shock...

Replacing the suspension spring
You will need: suspension spring tensioner body stand (preferably height adjustable) key "19" The rear suspension springs are replaced if they break or settle excessively, as...

Replacing the rear wheel hub bearings
You will need: cylinder key, key "on 27" pliers screwdriver beard or punch hammer jack stand wheel chocks Remove the brake drum ( see subsection 7.2.1. ). The hub has two...

Adjusting clearances in the rear wheel hub bearings
You will need: cylinder key, key "on 27" pliers screwdriver hammer jack stand wheel chocks Lower the parking brake lever all the way down (the car is released). Raise the rear...

Removal and installation the rear suspension beam
You will need: keys "10", "13" and "19" hammer pliers large flat head screwdriver two stands under the body (preferably height adjustable) two screw clamps of suspension springs...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Chassis: Rear suspension VAZ-2108 (1984-2003)
➠ Chassis: Rear suspension VAZ-2104 (1984-2012)
➠ Chassis: Rear suspension VAZ-2115 (1997-2012)
➠ Chassis: Rear suspension VAZ-2101 (1970-1983)
➠ Chassis: Rear suspension VAZ-2107 (1982-2012)

Share with friends: