View of headlight without rim
1 – facing rim; 2 – screw for fastening the trim rim; 3 – screw for adjusting the light beam in the horizontal direction; 4 – screw for adjusting the light beam in the vertical direction; 5 – optical element mounting screws; 6 – bracket for fastening the trim rim; 7 – oblong hole for bracket 6
Replacing lamps
1. Remove screw 2 (see fig. View of headlight without rim) fastenings of the facing rim and remove it, disengaging it from the bracket 6.
2. Loosen screws 5 securing the optical element of the headlight, turn the bezel counterclockwise and remove it.
3. Remove the headlight optical element and replace the bulb.
4. After replacing the bulb, install the optical element so that the brackets of the optical element enter the sockets of the inner rim of the headlight.
Attention! Halogen lamps can only be installed in headlights specially designed for them.
Attention! When replacing halogen lamps, wear gloves to avoid greasy fingerprints on the lamp glass. If there are such fingerprints on the lamp, remove them with alcohol.