Features of the gearbox device Transmission 1 - bottom cover; 2 - hole plug for checking the oil level; 3 - gear wheel of the second gear of the intermediate shaft; 4 - gear wheel of the III gear of the...
Removal and installation of a transmission Clutch Release Drive 1 - retracting spring of the fork; 2 - locknut; 3 – an adjusting nut of draft; 4 - cotter pin; 5 - clutch release fork; 6 - pusher; 7 - a bolt of fastening of...
Disassembly and assembly of the gearbox Interior view of the clutch housing The red arrows indicate the nuts securing the clutch housing to the gearbox. The white arrow indicates the hole in the front cover to drain the...
Checking the technical condition of the gearbox Cleaning 1. Thoroughly clean the gearbox parts before inspecting. Use a brush or scraper to remove all deposits and clean the holes and slots from possible contamination; then...
Possible transmission malfunctions Cause Elimination Method Noise in gearbox Bearing noise Replace defective bearings Wear of gear teeth and synchronizers Replace worn parts Insufficient oil level in the gearbox...