Technical characteristics of cars VAZ-21011 «Zhiguli»
Main overall dimensions of the VAZ-2101 car
Main overall dimensions of the VAZ-2101 car * Height without load.
Main overall dimensions of the VAZ-2101 car * Height without load.
Main overall dimensions of the VAZ-21011 car
Main overall dimensions of the VAZ-21011 car * Height without load.
Main overall dimensions of the VAZ-21011 car * Height without load.
Main overall dimensions of the VAZ-2102 car
Main overall dimensions of the VAZ-2102 car * Height without load.
Main overall dimensions of the VAZ-2102 car * Height without load.
Technical characteristics of cars
Parameters VAZ car model 2101–2103 21011 2102 21021 21023 General information Number of seats, including driver's seat 5 5 or 2 Load capacity, kg 400 430 Curb weight of the...
Parameters VAZ car model 2101–2103 21011 2102 21021 21023 General information Number of seats, including driver's seat 5 5 or 2 Load capacity, kg 400 430 Curb weight of the...
Tightening torques for threaded connections
Detail Thread Tightening torque, Nm (kgf·m) nominal minimum maximum Engine Bolt for fastening main bearing caps M10 x 1.25 80,36 (8,2) 68,31 (6,97) 84,38 (8,61) Oil pan mounting...
Detail Thread Tightening torque, Nm (kgf·m) nominal minimum maximum Engine Bolt for fastening main bearing caps M10 x 1.25 80,36 (8,2) 68,31 (6,97) 84,38 (8,61) Oil pan mounting...
Tools for car repair and maintenance
Designation Name A.40005 Universal Puller Set A.40006 Puller (ejector) front bearing of the primary shaft of the gearbox A.40009 Key for removing studs A.40026 Coolant Pump...
Designation Name A.40005 Universal Puller Set A.40006 Puller (ejector) front bearing of the primary shaft of the gearbox A.40009 Key for removing studs A.40026 Coolant Pump...
Fuels, lubricants and operating fluids used
Filling and lubrication point Quantity, l Name of materials Fuel tank including reserve 4–6.5 l 39 (42)* Automobile gasoline AI-91, AI-93 Engine cooling system, including interior...
Filling and lubrication point Quantity, l Name of materials Fuel tank including reserve 4–6.5 l 39 (42)* Automobile gasoline AI-91, AI-93 Engine cooling system, including interior...
Basic data for adjustments and control
Clearances in the valve drive mechanism between cams and levers on a cold engine, mm 0,15 Oil pressure in the engine lubrication system at a crankshaft speed of 5400 min⁻¹ and an...
Clearances in the valve drive mechanism between cams and levers on a cold engine, mm 0,15 Oil pressure in the engine lubrication system at a crankshaft speed of 5400 min⁻¹ and an...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More articles from other manuals on VAZ cars:
➠ General information: Specifications VAZ-21061 (1976-2006)
➠ General information: Specifications VAZ-21099 (1990-2004)
➠ General information: Specifications VAZ-2110 (1995-2007)
➠ General information: Specifications VAZ-21061 (1976-2006)
➠ General information: Specifications VAZ-21099 (1990-2004)
➠ General information: Specifications VAZ-2110 (1995-2007)
Share with friends:
- General information
- Vehicle description
- Vehicle device
- Vehicle operation
- Maintenance
- Main malfunctions
- Applications
- Power unit
- Engine repair
- Cooling and lubrication system
- Supply system
- Transmission
- Clutch
- Transmission
- Cardan gear
- Rear axle
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Electrical equipment
- Engine electrics
- Equipment and devices
- General information
- Specifications
- Operation and maintenance
- Power unit
- Engine repair
- Cooling system
- Lubrication system
- Power and exhaust system
- Ignition system
- Engine electrics
- Transmission
- Clutch
- Car gearbox
- Cardan gear
- Rear axle
- Chassis
- Car suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and locks
- Electrical equipment
- Equipment and devices
- Lighting and signaling

