Operation and maintenance of cars VAZ-21011 «Zhiguli»
Controls and control devices Paddle switches Instrument cluster Governing bodies 1 - outdoor lighting switch. By pressing the lower arm of the key, the parking lights and the license plate light are switched...
Ignition switch Ignition switch The key in the ignition switch occupies the following positions: 0 - everything is off. The key is removed, the anti-theft device is not included. 1 - the ignition...
Interior ventilation and heating controls Interior ventilation and heating scheme 1 - liquid temperature indicator in the engine cooling system; 2 - rotary deflectors; 3 - hatch for air intake (on the engine hood; 4 –...
Engine start Fuel pump After a long parking of the car, before starting the engine, it is recommended to pump fuel into the carburetor float chamber, for which press the lever 1 of manual fuel...
Car movement Gearshift pattern The figure shows the switching diagram of a four-stage (A) and five-speed (IN) gearboxes. The movement of the car is recommended to start on a warm engine. If...
Braking and parking The design of the brakes provides effective braking. However, try to brake smoothly and moderately at all times, avoiding hard braking. Do not turn off the ignition and do not put...
Ignition advance correction Octane corrector 1 - nut; 2 - body; 3 - octane corrector When operating a car, sometimes, depending on the quality of the fuel being refueled, it becomes necessary to correct the...
Precautions during operation of the vehicle The car is easy to drive, has high dynamic and high-speed qualities. However, do not rush to fully exploit these qualities until you have gained confidence in driving it and...
Car body care Threshold drainage holes Door drain holes The body is the basic and most expensive element of the car. It is made of modern materials and protected from corrosion by high-quality...
Car storage In operation, pay great attention to the storage conditions of the car, since with an annual mileage of 15 thousand km, the car is in motion for about an hour a day. The optimal...
Vehicle maintenance During the operation of the car, processes such as loosening of the fastening of components and assemblies, wear of rubbing surfaces, violation of adjustment parameters, aging of...
Car lubrication scheme Lubrication scheme Note on the lubrication schedule Position in figure Name List of works Every 500 km 1 Crankcase Check oil level and top up if necessary Every 10,000 km 2...
Scheme for cleaning, checking and adjusting Scheme for cleaning, checking and adjusting Instructions for cleaning, checking and adjustment scheme Position in figure Name List of works Every 500 km 1 wheels Check and adjust...
Features of the device and repair of the VAZ-21011 engine Disassembly, assembly and repair of the 21011 engine are similar to the disassembly, assembly and repair of the 2101 engine. There are some differences in the repair of cylinder...
Features of the device and repair of the VAZ-2102 Rear suspension When installing the rear suspension distance X (see fig. Rear suspension installation diagram ) it is necessary to withstand 123 mm. Cylindrical springs differ...
Features of the device and repair of VAZ-21021 and VAZ-21023 VAZ-21021 car On the VAZ-21021 car, the engine 21011 was installed instead of 2101. Therefore, the features in the repair of the engine of this car are the same as those of the...