Engine cooling system VAZ-21011 «Zhiguli»
Features of the engine cooling system
Cooling system 1 – pipe for draining liquid from the heater radiator and carburetor to the coolant pump; 2 – pipe for draining hot liquid from the cylinder head to the heater...
Cooling system 1 – pipe for draining liquid from the heater radiator and carburetor to the coolant pump; 2 – pipe for draining hot liquid from the cylinder head to the heater...
Checking the level and density of the liquid in the cooling system
1. The correct filling of the cooling system is checked by the liquid level in the expansion tank, which on a cold engine (at 15–20°C) should be 3–4 cm above the "MIN" mark on the...
1. The correct filling of the cooling system is checked by the liquid level in the expansion tank, which on a cold engine (at 15–20°C) should be 3–4 cm above the "MIN" mark on the...
Filling the cooling system with liquid
Refueling is carried out when changing the coolant or after engine repair. 1. Remove the plugs from the radiator and expansion tank, open the heater tap. 2. Fill the radiator with...
Refueling is carried out when changing the coolant or after engine repair. 1. Remove the plugs from the radiator and expansion tank, open the heater tap. 2. Fill the radiator with...
Adjusting the tension of the pump drive belt
Pump Drive Belt Tension Check Diagram The belt tension is checked by the deflection between the generator and pump pulleys or between the pump and crankshaft pulleys. With normal...
Pump Drive Belt Tension Check Diagram The belt tension is checked by the deflection between the generator and pump pulleys or between the pump and crankshaft pulleys. With normal...
Coolant pump
Longitudinal section of the coolant pump 1 – body; 2 – lid; 3 – pump cover fastening nut; 4 – fan; 5 – pulley hub; 6 – overlay; 7 – roller; 8 – pulley; 9 – bearing lock screw; 10...
Longitudinal section of the coolant pump 1 – body; 2 – lid; 3 – pump cover fastening nut; 4 – fan; 5 – pulley hub; 6 – overlay; 7 – roller; 8 – pulley; 9 – bearing lock screw; 10...
Thermostat — Removal, Installation and Checking
Thermostat 1 – inlet pipe (from the engine); 2 – bypass valve; 3 – bypass valve spring; 4 – glass; 5 – rubber insert; 6 – outlet pipe; 7 – main valve spring; 8 – main valve seat;...
Thermostat 1 – inlet pipe (from the engine); 2 – bypass valve; 3 – bypass valve spring; 4 – glass; 5 – rubber insert; 6 – outlet pipe; 7 – main valve spring; 8 – main valve seat;...
Radiator — removal, installation and inspection
Removal 1. Drain the fluid from the radiator and cylinder block by removing the drain plugs in the lower radiator tank and on the cylinder block; open the cabin heater tap and...
Removal 1. Drain the fluid from the radiator and cylinder block by removing the drain plugs in the lower radiator tank and on the cylinder block; open the cabin heater tap and...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More articles from other manuals on VAZ cars:
➠ Power unit: Cooling and lubrication system VAZ-11113 (1996-2003)
➠ Power unit: Cooling and lubrication system VAZ-21061 (1976-2006)
➠ Power unit: Cooling and lubrication system VAZ-21099 (1990-2004)
➠ Power unit: Cooling system VAZ-2110 (1995-2007)
➠ Power unit: Cooling system VAZ-2107 (1982-2012)
➠ Power unit: Cooling and lubrication system VAZ-11113 (1996-2003)
➠ Power unit: Cooling and lubrication system VAZ-21061 (1976-2006)
➠ Power unit: Cooling and lubrication system VAZ-21099 (1990-2004)
➠ Power unit: Cooling system VAZ-2110 (1995-2007)
➠ Power unit: Cooling system VAZ-2107 (1982-2012)
Share with friends:
- General information
- Vehicle description
- Vehicle device
- Vehicle operation
- Maintenance
- Main malfunctions
- Applications
- Power unit
- Engine repair
- Cooling and lubrication system
- Supply system
- Transmission
- Clutch
- Transmission
- Cardan gear
- Rear axle
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Electrical equipment
- Engine electrics
- Equipment and devices
- General information
- Specifications
- Operation and maintenance
- Power unit
- Engine repair
- Cooling system
- Lubrication system
- Power and exhaust system
- Ignition system
- Engine electrics
- Transmission
- Clutch
- Car gearbox
- Cardan gear
- Rear axle
- Chassis
- Car suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and locks
- Electrical equipment
- Equipment and devices
- Lighting and signaling

