Repair of cooling and lubrication system VAZ-2101 Zhiguli
All articles on the device and repair of components and assemblies of the cooling and lubrication system of the engine of the VAZ-2101 Zhiguli car.
Design and operation of the cooling system Cooling system - liquid (pic. 19), closed type, with forced circulation and expansion tank. The system is filled with liquid Tosol A-40 - an aqueous solution of antifreeze Tosol A...
Coolant pump — check and repair The pump must be disassembled in the following order. Remove the pump from the engine and disconnect its housing from the cover. Fix the cover in a vice, remove the impeller from...
Radiator — removal and inspection Removing the radiator Open the heater cock, remove the cap from the filler neck of the expansion tank and drain the fluid from the radiator and cylinder block by removing the...
Thermostat check At the thermostat, it is necessary to check the temperature of the beginning of the opening of the main valve and the stroke of the main valve. To do this, the thermostat is...
The device and operation of the lubrication system Lubrication system (pic. 24) - combined. Under pressure, the main and connecting rod bearings, supports and camshaft cams, shaft bearings and the oil pump drive gear are...
Removal and installation of the oil pump on the car Install the car on a lift, brake it with a parking brake and disconnect the mass terminal from the battery. Unscrew the drain plug and drain the oil from the engine crankcase into...
Disassembly and assembly of the oil pump Secure the oil pump carefully in a vise ( see fig. 25 ). Unscrew the bolts securing the intake pipe and remove it together with the oil pressure reducing valve 10 and the spring...
Checking parts and repairing the oil pump All parts must be flushed and blown out with compressed air. It is necessary to inspect the body and cover, if there are cracks, replace the parts. Check with a set of probes the...