Contents: Sequence of execution ↓ Installation ↓
The ignition relay R4 and the hazard warning light and turn signal relay R5 are installed behind the instrument panel.
Sequence of execution
1. Prepare the vehicle for operations (see "Preparing a car for maintenance and repair").
[The article is taken from an online resource: vazbook.ru]
2. Remove the instrument panel (see p. 210 (212) "Instrument panel model 2105 (2107) - removing and replacing lamps").
3. With a socket wrench by 10 mm using an extension, unscrew the nut that secures both relays to the stud of the engine compartment partition.
4. Remove the ignition relay from the stud and disconnect the wiring block.
5. Having removed the two ends of the "ground" wires from the stud, we replace the hazard warning light and turn signal relay in the same way.
Installation
Installation of all removed parts is carried out in reverse order.