Contents: Removal ↓ Installation ↓
It is more convenient to remove the electric pump when the tank is empty. Otherwise, prepare a container for draining the liquid with a volume of at least 2.5 liters.
Removal
1. Prepare the vehicle for operations (see "Preparing a car for maintenance and repair").
2. Disconnect the wire from the negative terminal of the battery (see "Battery - Removal and Installation").
3. Using an upward movement, remove the tank from the bracket protrusions.
4. Disconnect the wire tips from the electric pump plugs. The yellow-black wire is connected to the side (positive) output, and the gray-black one to the central one (negative) conclusion.
5. Remove the tube from the pump nipple. If there is washer fluid in the tank, tilt the tank to prevent leakage. Open the tank lid and drain the fluid into a previously prepared container.
6. Using a screwdriver, remove the electric pump from the rubber seal in the tank.
The sealing ring must be elastic and not have any cracks. If necessary, pry it off with a slotted screwdriver, remove it and replace it.
Installation
Advice: Before installing the tank on the bracket, in order not to damage the tank wall, use coarse-grained sandpaper to clean the ribs of the bracket from burrs and blunt the sharp edge with a file.
Installation of all removed parts is carried out in reverse order.
[The text is copied from the online portal VAZbook.ru]