- fasten the axis of the intermediate reverse gear before installing the shafts in the crankcase of the box with a torque of 8 kgf·m;
- before installing the 5th gear and reverse fork rod into the crankcase, install a distance sleeve on the rod;
- press the inner ring of the bearing onto the gear block of the 5th gear and reverse gear, and the outer ring into the socket of the rear cover;
- to facilitate the installation of the rear cover, press the rear bearing of the secondary shaft onto the shaft;
- intermediate gear 1 (see fig. 125) reverse gear, gear 3 and fork 4 are installed at the same time;
- when assembling the gear lever, coat the ball head or the sphere of the ball joint with lubricant LSTs-15;
- tighten the gear block mounting bolt with a torque of 8 kgf·m.