Gearbox assembly (VAZ-2105)

Assemble the gearbox in the reverse order of disassembly, taking into account the following:

the spring of the reverse fork rod retainer differs from others in its elasticity, it is painted green or has a cadmium coating;
when connecting the clutch housing to the front cover of the gearbox, the oil drain hole in the front cover must be directed downwards;
before installation, coat the working surface of the seals with LITOL-24 grease;
when installing the reverse gear retaining ring, use the 41.7816.4069 (see fig. 117), and when installing bearings and seals - mandrels 41.7853.4028, 41.7853.4032, 41.7853.4039.

Mandrel 41.7853.4028 is shown in Fig. 121. The other two mandrels are of the same type. Mandrel 41.7853.4032 has a punch outer diameter of 60 mm, and a spring-loaded centering rod with a diameter of 19.5 mm is located in the mandrel tube. Mandrel 41.7853.4039 has a punch outer diameter of 56 mm, on the end of which a centering belt with a diameter of 32.1 mm is made for fitting a gland.