Data for checking the headlight washer gear motor
| Nominal voltage, V | 12 |
| Current consumption at a torque of 0.49 N·m (0.05 kgf·m)*, A, no more than | 1,5 |
| Number of double shaft strokes per minute at a torque of 0.49 N·m (0.05 kgf·m)* | 50±5 |
* At 12V and 250°C.
The wiring diagram for the headlight washers is shown in subsection 12.6. They are switched on by the right lever of the three-lever switch 5, when voltage is supplied to terminal "86" of relay P2 from fuses "12" and "16", i.e. when the low or high beam headlights are on (see subsection 12.10).
The headlight washer motor and gearbox are combined into one unit (gear motor). The design of the cleaner's electric motor is non-disassemblable and in case of failure it must be replaced with a new one.