Warning! The compression of the springs of the left and right side of the front suspension must be the same. Otherwise, a twisted bar, straightening out, can cause injury.
Pillows are more convenient to change when the car is on wheels.
key «at 13» unscrew the two nuts securing the cushion bracket to the lower arm.
Before removing, we mark the upper part of the bracket in order to correctly install it back.
With a mounting spatula, we squeeze the end of the rod and put a new pillow, after wetting its hole with soapy water. We install the pillow so that its protrusion falls into the hole in the bracket.
If the stabilizer bar is deformed or if it is heavily worn from contact with the pads, it should be replaced. To do this, remove the engine mudguard and the brackets for attaching the pillows.
head «for 8» unscrew the 12 screws securing the mudguard.
Remove the brackets securing the ends of the rod to the lower suspension arms.
head «at 13» we unscrew two nuts securing the two brackets of the rod to the spars from the bottom of the engine compartment and..
... remove the bar with mounting brackets.
Install the stabilizer bar in reverse order.