Pic. 169. Front door: 1 - door opening limiter; 2 - inner door handle; 3 - power window handle; 4 - armrest fastening screws; 5 — a pocket of an upholstery of a door; 6 - door upholstery; 7 - door lock button.
Door lock (pic. 170) has a lock switch, from the passenger compartment the lock is locked by pressing button 1. The locked lock can be released by lifting the lock button, or pulling the inside handle 17 of the door or the lock switch.
Pic. 170. Front door lock: 1 - lock lock button; 2 - thrust of the lock button; 3 - bracket for fastening the external drive of the lock; 4 — leash of the lock switch; 5 — the button of the external drive of the lock; 6 - cracker spring; 7 - cracker latch; 6 - rotor; 9 - lock body: 10 - ratchet; 11 - ratchet spring; 12 - roller off the lock; 13 - central roller; 14 - lock lock lever; 15 — thrust of the internal drive; 16 - bracket; 17 - inner door handle.
Power window (pic. 171) fastened on the inner panel of the door with nuts to the welded studs 1. The cable 7 covers two rollers 5 and 8 installed on the upper and lower brackets of the guide tube. In the case of the mechanism 3 of the power window, the cable is wound on a drum. A spring brake is located on the drive roller, which prevents the glass from spontaneously lowering. Handle 2 of the power window is attached to the splined end of the drive shaft using the handle lining, which, when installed on the handle, enters the annular groove of the shaft.
Pic. 171. Door window regulator: 1 - fastening studs; 2 - power window handle; 3 - power window mechanism; 4 - shell with a cable; 5 - top roller; 6 - plate for mounting the sliding glass; 7 - cable; 8 - bottom roller.
The door opening limiter is interchangeable with the limiter from the VAZ-2108 car. The flat rod of the limiter is fastened with a finger to the body pillar at one end, the second end has a pin that limits the maximum opening. The rod has vyshtampovki on both sides. Steel rollers are pressed against the rod on both sides, which are inserted into a cracker made of polyamide. The rollers for stamping the steel rod fix the open position of the door.