Note: When searching for a faulty bulb, keep in mind that the instrument panel is upside down. The location of the bulbs on the front side of the instrument panel is shown in the chapter "Controls and Instrumentation".
Location of lamps and terminals on the instrument panel: 1, 5, 7, 8, 12, 15 and 20 - backlight lamps; 2 - terminals for connecting the red connector of the wiring harness; 3 - right turn signal indicator light; 4 - left turn signal indicator light; 6 - terminals for connecting the white block of the wiring harness; 9 - Oil pressure warning light; 10 - Parking brake indicator light; 11 - Battery charge indicator lamp; 13 - hazard warning light indicator; 14 - Engine management system malfunction indicator lamp; 16 - High beam indicator lamp; 17 - Low brake fluid level indicator lamp; 18 - External lighting indicator lamp; 19 - Fuel reserve indicator lamp
Sequence of execution
1. Remove the instrument panel (the wiring harness pads do not need to be disconnected) (see above, "Instrument cluster - removal and installation").
2. Turn the protruding part of the socket of the faulty lamp counterclockwise and remove it together with the lamp from the instrument panel.
The original can be found on the website VAZbook.ru
3. Replace the faulty lamp.
4. Install the new lamp and instrument panel in the reverse order.