Contents: Removal ↓ Installation ↓
Removal
1. Prepare the vehicle for work and disconnect the wire terminal from the negative terminal of the battery (see "Preparing the car for maintenance and repair").
2. Having released the steering column adjustment lever, move the steering wheel down.
3. Remove the instrument panel trim and, without disconnecting the wiring harness connectors from it, move it to the side (see "Instrument panel - removal and installation").
4. On both sides of the dashboard, use a Phillips screwdriver to unscrew the two screws securing the instrument panel to the instrument panel brackets.
5. Remove the shield from the instrument panel opening and disconnect the two wiring harness connectors.
Note: The instrument cluster connectors are color-coded, so there is no need to mark the connectors.
6. Remove the instrument panel.
Installation
We install the instrument panel in the reverse order. We connect the wiring harness pads to the panel in accordance with their color.