Tip: In the event of a malfunction of the fuel pump, we recommend replacing the fuel module assembly, since the operation of replacing the pump requires practical skill and accuracy (fuel module elements can be damaged).
To perform the operation you will need: hair dryer (technical) or hot water.
Removing
1. Remove the fuel module (see "2111 engine fuel module (1,5i) - removal and installation").
2. Remove the strainer from the pump nozzle (see "2111 engine fuel module (1,5i) - cleaning the strainer").
3. Using pliers, remove the locking pin from the guide hole.
4. Remove the pump casing from the guides of the fuel module cover.
5. Use a slotted screwdriver to release the three latches and remove the fuel pump housing cover.
6. Remove the fuel pump from the casing.
7. Hair dryer (or boiling water) we heat the end of the corrugated tube put on the fuel pump nozzle and disconnect the corrugated tube from the pump nozzle (see more details. "Engine fuel module 11183 (1,6i) - fuel pump replacement").
Installation
Install the fuel pump in reverse order.