- interchangeable head "at 24"
- extension
- knob
Disconnect the wire from the terminal "–" battery.
Set the steering wheel to the straight ahead position.
1. Remove the horn trim.
2. Mark the relative position of the shaft and the steering wheel hub.
3. Turn away a nut of fastening of a steering wheel flush with an end face of a shaft.
4. Pull or knock the steering wheel off the shaft splines.
5. Finally loosen the steering wheel nut.
6. Remove the steering wheel.
7. Lubricate the horn contact ring with grease before installing the steering wheel. Install the steering wheel in the reverse order of removal.