You will need pliers.
Cartridges for control lamps and illumination lamps (shown by arrows) mounted on the circuit board of the instrument cluster.
The vehicle is equipped with instrument cluster illumination lamps and control lamps of the AMN 12-3 type. The lamp marking is printed on the lamp base (the place of marking is shown by an arrow).
1. Remove the instrument cluster from the car (see subsection 8.6.1).
2. Turn the bulb socket counterclockwise until it stops and...
3.... remove the bulb holder from the circuit board in the instrument cluster.
4. Remove the bulb from the socket by turning it fully counterclockwise.
5. Install a new bulb in the instrument cluster in the reverse order of removal. The lamp when installed in the socket and the socket when installed in the circuit board of the instrument cluster must be turned clockwise. Then install the instrument cluster in the reverse order of removal.