- pliers
- transmission oil can
The speedometer drive cable is connected at one end to the drive gearbox and at the other end to the speedometer mechanism in the instrument cluster.
1. Pull the instrument cluster out from the instrument panel to gain access to the speedometer drive cable (see subsection 8.6.1).
2. Loosen the speedometer cable mounting nut (if the nut is too tight, carefully unscrew it with pliers) and...
3....disconnect the speedometer cable from the instrument cluster.
4. Unscrew the nut securing the speedometer cable from the drive on the gearbox (if the nut is too tight, carefully unscrew it with pliers) and...
5....disconnect the cable from the drive.
6. Use a screwdriver to pry up the speedometer cable seal and...
7....remove the seal from the hole in the front body shield.
[The article is copied from the website VazBook]
8. Before installation, lubricate the speedometer drive cable with transmission oil, pouring oil into the casing (until oil appears on the other side of the cable).
9. Install the speedometer drive cable in the reverse order of removal.