You will need a screwdriver.
Before starting work: Disconnect the wire from the terminal "–" battery.
The rear light is attached to the body with a screw.
1. Loosen the tail light bolt...
2.... take the lamp away from the body and lower it onto the buffer.
3. Unscrew the fastening screw and remove the two tips from it "massive" wires.
4. Disconnect the rear light harness and...
5....remove the lamp from the vehicle.
6. If the new lantern is not equipped with lamps with sockets, then remove the sockets with lamps from the removed lantern (by turning the chuck counterclockwise until it stops). Install the tail light in the reverse order of removal and check the operation of its lamps.