When installing a new windshield, pre-glue the rear-view mirror mounting plate. To ensure reliable bonding, it is recommended to carry out work at a car service station.
Clean the glass with a blade or a sharpened knife from old glue at the place where the plate was glued. The plate should be located along the axis of the car, its bottom should be at a distance of 105 mm from the upper edge of the glass. Degreasing! place of gluing with ethyl or isopropyl alcohol. Activator LT-736 is applied with a brush to the glass at the place of gluing, and 1-2 drops of LT-317 glue are applied to the surface of the plate and the plate is pressed against the glass for 1-1.5 minutes. 24 hours after the curing of the adhesive joint, the rear-view mirror is put back in place.
When checking the adhesion strength, the plate should not come off under the action of a load of 30 kg applied perpendicular to the glass surface for 15 s.