When installing the windshield, the grooves of the seal are washed with water and blown with compressed air, the seal is put on the glass, the groove of the seal with which it is installed on the body flange is lubricated with glycerin or soapy water. Insert the cord into the groove with a screwdriver 1 (pic. 178), install the glass in the opening of the body and pull the ends of the cord from the inside of the body so that the seal 2 sits in place. The assistant should lightly press on the glass from the outside. If the glass is not installed, check the opening of the body using glass without a seal. Deviations in the dimensions of the opening are eliminated by straightening.
Pic. 178. Installing the windshield
Replacing the glass of the tailgate and sidewalls is carried out in the same way.