Removing the front door trim (see sect. «Removal and installation of an upholstery of forward doors»), the handle for adjusting the external rear-view mirror, the inner lining and, having unscrewed the fastening screws, remove the mirror. Remove the drain glass seals from the door, remove the protective aprons through the holes in the inner panel. Unscrew the fastening screws and remove the guide grooves of the sliding glass down. Then unscrew the screws securing the sliding window, unscrew the nuts securing the window regulator, remove the window regulator and remove the sliding window through the top.
Disconnect from the door lock thrust 3, 4 and 13 (see fig. 161) lock switch, outer and inner door handles. Unscrew the fastening nuts and remove the outer door handle. Unscrew the screws and remove the door lock. Take out the inner door handle assembly with the bracket, having previously unscrewed the fastening screws.
If necessary, unscrew the fastening screws and remove the door opening limiter.
The door is assembled in the reverse order.