Engine. Equipped with intake 2 (figure 189) cold air, taking air directly under the radiator grille. It is made of polypropylene and is fixed above the radiator of the engine cooling system. The intake 2 is connected to the thermostat 4 of the air filter by a corrugated polypropylene air duct 3.
Body. The body frame has a different shape with two openings for the front and rear doors. The front side doors and their mechanisms have the same design as the doors of the VAZ-2108. The only difference is in size. The rear side doors are similar in design to the front ones, but differ slightly in the design of the door locks. The locks are not locked from the outside with a key and are equipped with an additional lock against opening the lock from the inside. The lever for this lock is located on the end of the door under the outer lock. If you move the lever down before closing the door, it will be impossible to open the door from the inside. It can only be opened with the outer door handle.
The body repair method is the same as for the VAZ-2108 car.
VAZ-21093
The VAZ-21093 car differs from the VAZ-2109 car by the installation of the 21083 model engine, the design and repair features of which are described in the section "Car VAZ-21083".
View the original on the internet resource VAZbook