- intake valves - 0.2±0.05
- exhaust valves - 0.35±0.05
Minimum crankshaft speed, rpm — 750–800
Oil pressure in the engine lubrication system at a crankshaft speed of 5600 rpm, not less than, kgf/cm² — 4.5
Minimum pressure in the engine lubrication system at 750-800 rpm, kgf/cm² — 0.8
Temperature of the liquid in the cooling system of a warmed-up engine at an air temperature of 20-30°C, full load and movement at a speed of 80 km/h,°C, no more than — 95
The coolant level in the expansion tank on a cold engine is 25-30 mm above the "MIN" mark
Density of coolant Tosol AM-40 at 20°C, g/cm³ — 1.078—1.085
The gap between the spark plug electrodes, mm — 0.7–0.8
The original source is published on the website vazbook
Initial ignition advance angle to TDC — (1±1)°
Free play on the clutch release fork lever, mm — 3.3–3.7
Free travel of the brake pedal with the engine not running, mm — 3-5
Maximum thickness of linings for front and rear brake pads, mm — 1.5
The fluid level in the brake hydraulic reservoir with the cover removed is up to the "MAX" mark
Maximum slope on dry hard ground on which a fully loaded vehicle is held for an unlimited time by the parking brake when the lever is moved by 4-5 teeth of the sector, % — 25
Steering wheel play in the position corresponding to straight-line driving is no more than 5°
Front wheel alignment for a run-in vehicle under a distributed load of 320 kg, mm — 0±1
Front wheel alignment for a run-in vehicle under a distributed load of 320 kg is 0°±30'
The same, when measuring between the rim and the vertical, mm - -3...+3
The longitudinal angle of inclination of the wheel rotation axis for a run-in vehicle under a distributed load of 320 kg is 1°30'±30'
Tire pressure, kgf/m²:
- 155/80R13 — 1,9
- 165/70R13 — 2,0