Note. The steering wheel sits very tightly on the splines of the shaft, so do not immediately unscrew the wheel fastening nut: in case of a sharp impact, the steering wheel, jumping off the splines, can cause injury. For ease of further installation, mark the position of the steering wheel relative to the shaft.
1. Remove a decorative overlay of a steering wheel.
2. Loosen the steering wheel nut until its end is flush with the end of the steering shaft.
3. With sharp blows of the hand, knock the steering wheel off the splines of the steering shaft.
6. Install the steering wheel in the reverse order of removal, in accordance with the previously made markings. Tighten the wheel nut to a torque of 32-51 Nm (3.2-5.1 kgf·m).
4. Finally loosen the steering wheel nut.
5. Remove the steering wheel.