The expansion tank is installed on the left side of the engine compartment next to the battery.
You will need:
- coolant (Tosol-A40)
- clean rag
Before the beginning
Place the vehicle on a level surface.
Attention! Check the coolant level only on a cold engine.
Attention! The coolant is toxic, so be careful when handling it.
Attention! Do not fill the reservoir above the mark "MAX", since when the engine is running, its volume will increase.
1. The fluid level in the tank must be between the marks "MIN" And "MAX". If the level approaches the mark "MIN" or is lower, add fluid.
2. Open the tank lid.
3. Add coolant up to the mark "MAX". Replace the reservoir cap and wipe up any spilled fluid.