Checking the level and adding fluid to the washer reservoir (VAZ-21099)

You will need:

• in summer - clean water
• in winter - antifreeze

Advice: Use antifreeze from well-known companies.

Warning! Take precautions when working with antifreeze. Do not use the washer if the fluid level is below the pump intake hole inside the tank: the washer motor will fail.

1. The washer reservoir is located under the hood at the front on the passenger side.



2. Unscrew the tank cap.



The information is published on the website [VAZBOOK.ru]



3. Remove the cup and check the mesh. If it is dirty, rinse the mesh with water and put it back in place.



4. Add liquid to the level of the grid, then tighten the tank cap.