- screwdriver
- key on "10"
- vessel with water
To adjust the thermostat, we recommend contacting a specialist.
The thermostat is located on the air filter.
1. Loosen the bolt on the air filter hose.
2. Remove the thermostat with the warm air supply hose.
3. Loosen the clamp and remove the corrugated hose from the thermostat.
4. Check that the thermostat damper should block the cold air supply hole.
5. Lower the thermoforce element into a vessel with water heated to a temperature of 35°C...
6....after which the damper should turn and close the hot air outlet. If this does not happen, you need to adjust the thermostat.
7. Install all parts in reverse order.