1. Remove one axle gear from the differential housing by turning it 90° around the satellite axis.
2. Remove the second axle gear from the differential housing.
3. Remove the retaining ring from the satellite shaft.
4. Remove the satellite axle from the differential housing.
5. Remove the two satellites from the differential housing.
6. Loosen the bolts securing the driven gear to the differential housing.
7. Press the driven gear off the differential housing.
8. Press off the differential bearings with a puller (see warning).
Warning!
- When pressed with a puller, the bearings are destroyed. Therefore, remove the bearings only in case of their replacement.
- If you need to replace the speedometer drive gear, you can press the bearing without destroying it using two screwdrivers, applying force to the inner ring of the bearing. The gear will be destroyed, but it still needs to be replaced.