Contents: Removal ↓ Installation ↓
To complete the work you will need a Torx T-16 socket wrench.
Removal
1. Remove the caliper (see above, "Front Brake Caliper - Removal and Installation").
2. Secure the caliper in a vice and unscrew the guide pin bolts (see "Front brake pads - replacement").
3. With a socket wrench Torx T-16 we unscrew the two bolts securing the cylinder body to the movable bracket.
4. Remove the brake cylinder.
Installation
1. Install the new cylinder in reverse order.
The material is posted on the online resource www.vazbook.ru
2. After installing the caliper assembly on the vehicle and connecting the hose to it, remove air from the hydraulic drive of the brake system (see "Hydraulic brake drive - bleeding").
3. Make sure there are no fluid leaks from the new brake cylinder, the bleed nipple, or the connection between the cylinder and the brake hose.