- keys "8", "10"
- screwdriver
Remove the door trim (see subsection 9.6.1.) and protective film.
1. Install the window lift handle and lower the glass down so that the bolts securing the glass clip to the movable bracket (slider) are opposite the window of the inner door panel.
2. Insert a wedge between the glass and the seal to prevent it from moving further downwards when unscrewing the bolts securing the frame to the sliding bracket of the window regulator.
3. Mark the mounting bolts of the window frame (so that when installed it takes its original place).
4. Unscrew the two bolts securing the window lowering frame to the sliding window lifter bracket.
5. Remove the wedge. Lift the glass up and reinsert the wedge, locking the glass in the upper position.
6. Remove the window lift handle.
7. Unscrew the three nuts securing the window lift mechanism.
8. Unscrew the two nuts securing the window regulator pillar.
The article is taken from an online resource: VazBook.ru
9. Remove the window regulator through the lower door access window.
10. Install the window lifter in the reverse order of removal. Install the door trim.