Minimum crankshaft speed at idle, min⁻¹ — 820-900
Oil pressure in the engine lubrication system at an oil temperature of 85°C and a crankshaft speed of 5600 min⁻¹, not less than, MPa (kgf/cm²) — 0.45 (4.5)
Density of coolant Tosol A-40 at 20°C, g/cm³ — 1.078-1.085
Temperature of the liquid in the cooling system of a warmed-up engine at an air temperature of 20-30°C, full load and driving at a speed of 80 km/h, no more than,°C — 95
The coolant level in the expansion tank on a cold engine is 25-30 mm above the "MIN" mark
The gap between the spark plug electrodes, mm — 0.7-0.85
Initial ignition advance angle to TDC, degrees — 1±1 (4±1)*
Full travel of clutch pedal, mm — 110±5
Free travel of the brake pedal with the engine not running, mm — 3-5
Free play of the steering wheel in the straight-ahead position, no more than, degrees — 5
Front wheel alignment for a run-in vehicle under a load of 2200 N (225 kgf), mm — 0±1
Front wheel alignment for a run-in vehicle under a load of 2200 N (225 kgf), deg — 0°±30'
The same when measuring between the rim and the vertical, mm - -3...+3
Longitudinal tilt of the wheel rotation axis for a run-in vehicle under a load of 2200 N (225 kgf), deg — 2°±30'
Tire pressure of front and rear wheels, MPa (kgf/cm²) — 0.18 (1.8)
Minimum permissible thickness of linings for front and rear brake pads, mm — 1.5
The fluid level in the brake hydraulic reservoir with the cap installed is up to the lower edge of the filler neck
Maximum slope on dry hard ground on which a fully loaded vehicle is held for an unlimited time by the parking brake when the lever is moved by 4-5 teeth of the sector, % — 30
* In brackets - for engine mod. 11113.