- key "on 10"
- screwdriver
Before starting work: Disconnect the wire from the terminal "–" battery.
The ignition system switch is located in the engine compartment and is attached to the stud of the front end shield of the car body.
Switches of types 72.3734, 76.3734, 3620.3734, K563.3734, HIM-52, RT1903 and PZE4020 are used on the car.
1. Pry off the spring clip on the block with a screwdriver and...
2.... disconnect the block with wires from the ignition switch.
3. Loosen the switch mounting nut.
4. Remove from body stud "mass" wire and...
5....switch. Install the switch in the reverse order of removal.