Front right door lock
1 – case of lock retainer; 2 - rotor; 3 - retainer cracker; 4 - cracker spring; 5 – lock switch; 6 - outer handle of the lock; 7 - lock lock button; 8 - lock lock rod; 9 – spring of the lock lever; 10 - the lever of the internal drive of the lock; 11 – thrust of the internal drive; 12 - lock lock lever; 13 - central roller; 15 – draft of the switch of the lock; 16 - ratchet; 17 - the lever of the external drive of the lock
Fastening of the internal handle of a drive of the lock of a door
1 – handle fixing screw; 2 – inner handle; 3 – a nut of fastening of an axis of a tension roller of a cable of a window regulator
When replacing parts and mechanisms of the door, its disassembly is required.
1. Loosen the screws securing the armrest and remove it. Using a screwdriver, remove trim 1 with inside handle 2 of the door.
2. Remove the window regulator handle 2 by depressing the handle socket and removing the retaining spring using tool 1 A.78034.
3. Overcoming the force of the spring plastic holders, remove the door upholstery.
4. With the upper position of the sliding window, unscrew the screws 1 securing the rear groove and the nut securing the front groove, remove the grooves and lower the glass down (2 – a cable of a window regulator; 3 – nuts of fastening of the mechanism of a window regulator; 4 - internal handle of the lock drive; 5 - tension roller; 6 – an emphasis of a sliding glass).
5. After loosening the nut of the tension roller 5 of the power window, disconnect the cable 2 from the holder of the sliding glass, remove it from the rollers, lower the glass down and, tilting its lower edge towards you, remove it from the door through the lower opening.
6. Turn away nuts 3 fastenings, and remove the mechanism of a window regulator.
7. Remove the sliding window seal, unscrew the screws securing the frame of the swivel window and remove it complete with the frame.
8. Unscrew button 7 (see fig. Front right door lock) lock lock and screws 1 (see fig. Fastening of the internal handle of a drive of the lock of a door) fastening of an arm of the internal handle 2 drives of the lock; unscrew screws 3 (1 – lock lock button; 2 – draft of blocking of the lock) and remove the lock together with the drive rods, having previously disconnected the rod 15 (see fig. Front right door lock) from the lock switch.
9. Remove the handle of the external drive of the door lock by unscrewing the fastening nuts.
10. Turn away bolts and remove the door limiter.
11. Remove the lower seals of the sliding window together with the holders.