Removed instrument cluster
1 - holder
The arrows show the pilot lamp holders and the instrument cluster illumination lamp (middle top).
1. Carefully remove the cover of the radio socket on the instrument panel with a screwdriver or use a wire hook or screwdriver to remove the left deflector of the interior heating system.
2. Bend the right spring holder 1 and push the instrument cluster out of the socket. In case of damage to the right holder, bend the left one, which can be reached by hand from under the instrument panel with the fuse box removed.
3. Disconnect the wiring harness connectors and the flexible shaft of the speedometer drive from the instrument cluster, after unscrewing the nut securing the flexible shaft.
4. Install the instrument cluster in reverse order.
Attention! When removing the instrument cluster, pay attention to how the speedometer drive flexible shaft was laid, and when installing the instrument cluster, place the flexible shaft along the previous route, avoiding its bends with radii less than 100 mm.