- a gap of 0.1–0.5 mm is set between the pusher and the piston of the master cylinder (see Fig. Clutch pedal and master cylinder). This gap, necessary for complete disengagement of the clutch, is adjusted by the limiter 14 of the clutch pedal. The gap is determined by the free travel of the pedal, equal to 0.4–2 mm;
- the free travel of the working cylinder pusher, equal to 4–5 mm, is adjusted by nut 5 (see Fig. Slave cylinder and clutch release fork), which is fixed with lock nut 6. The amount of free travel of the pusher is controlled by a special template.
After performing the above adjustments, the free travel of the clutch pedal, before the clutch starts to disengage, should be 25–35 mm.
(The material is posted on the website: «VAZbook.ru»)