Windshield washer pump
1 - pump motor; 2 - cover of the supply tank; 3 - clutch; 4 – liquid supply tube; 5 - pump housing; 6 - rotor shaft; 7 - support of the rotor shaft; 8 - rim with a filter mesh; 9 - rotor
The injection pump and electric motor 1 are screwed to the cover 2.
Removing
1. For removal of the pump disconnect electric wires from the electric motor 1 and remove a tube from the union of the delivery pump.
2. Turn the cover 2 with the electric motor 1 counterclockwise and remove them from the supply tank assembly with the pressure pump.
Disassembly
1. To disassemble the pump, unscrew the screws, remove the motor and cover, disconnect the fluid supply pipe 4.
2. Prying off the edge of the rim 8, remove it together with the filter mesh.
3. Remove the clutch 3, then carefully tapping on the shaft 6 of the rotor 9, push out the support 7 and remove the shaft with the rotor.
Assembly and installation
Assemble and install in reverse order.