- cleaner 65 (see subsection 12.2) and the rear window washer 64, which are switched on by switch 37, installed on the instrument panel;
- lamp 67 for rear body lighting. The power supply circuits for the rear window wiper and washer are protected by fuse No.1, and the power supply circuit for the lamp is protected by fuse No.11.
The rear window wiper consists of a gear motor, a lever and a brush. The lever with the brush is laid to the right in the direction of the vehicle's movement. A thermal bimetallic fuse may be installed on some gear motors to protect against overloads.
The design of the gear motor allows it to be disassembled to eliminate minor faults (collector cleaning, etc.). The methods of disassembly and assembly are similar to those described in subsection 9.9.2 for windshield wiper motor.
For the rear window wiper, with a gear motor load of 0.49 N·m (0.05 kgf·m), a supply voltage of 14 V and an ambient temperature of 25±100°C, the number of double strokes of the gear motor shaft should be 50±5 min⁻¹, and the current consumption should not exceed 2 A.
Information copied from the portal www.vazbook.ru