Contents: Removal ↓ Installation ↓
To carry out repair work you will need:
- assistant;
- inspection pit or overpass.
Removal
1. Prepare the car for repair work.
2. Remove the radiator grille.
3. Unscrew the two screws securing the mudguards to the front fenders.
4. Using a 10 mm socket wrench, loosen the five nuts of the front engine guard mount.
5. On the right and left sides of the bumper, using an 8 mm socket wrench, unscrew one bolt of the lower bumper mount to the body bracket.
6. Using a 10 mm socket wrench, loosen the two bolts of the upper bumper mount.
Note: The following work is carried out together with an assistant.
7. Simultaneously, on both sides, move the bumper forward along the guides of the side brackets and remove the bumper together with the headlight covers.
Installation
We install the front bumper and all previously removed parts on the car in the reverse order.