Contents: Removal ↓ Installation ↓
To perform the work of removing the engine protection, an inspection pit or overpass is required.
Note: The engine protection is secured at the front with five nuts (1), at the sides with four screws (2) and at the back with two bolts (3) (see photo below).
Removal
1. Prepare the car for repair work.
2. Using a 10 mm deep-head socket wrench, unscrew the five self-locking nuts (1) of the front guard mount.
3. Using an 8 mm socket wrench, unscrew the four screws (2) securing the engine guard to the mudguards in the engine compartment.
4. Using a 10 mm socket wrench, unscrew the two bolts (3) of the rear protection mount.
5. Disengage the engine guard from the mudguards and remove it from the vehicle.
Installation
We install the engine protection and all previously removed parts on the car in the reverse order.
Mounting the engine guard on the car.