Removing
1. Remove the inner upholstery of the tailgate (see "Tailgate upholstery - removal and installation").
2. We lift the cover of the nut securing the wiper arm and the spanner wrench by 10 mm Loosen the nut a few turns.
3. Using sliding pliers, we press the wiper blade lever from the splines of the shaft.
4. Having unscrewed the nut, remove the lever from the shaft.
5. Disconnect the wiring harness block from the gear motor.
6. socket wrench by 10 mm with a deep head, unscrew the three nuts securing the gearmotor bracket and remove its doors, carefully removing the gearmotor shaft from the glass hole.
Installation
Install the gear motor in reverse order.