Contents: Removal ↓ Installation ↓
Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. On late production cars (in which the upper crossbar of the front panel has bends and additional shields above the headlights) remove the battery (see "Battery - Removal and Installation").
3. Disconnect the wiring block from the windshield washer reservoir fluid level sensor (1). Disconnect the two wiring blocks (2) of the windshield washer electric pump, having previously marked the block connected to the "+" terminal.
4. With a socket wrench by 10 mm unscrew the nut of the rear tank mount.
5. Using the same wrench, unscrew the bolt of the front mount of the tank. On cars of recent years of production, the front mount of the washer tank is made with a stud and nut.
6. Lift the tank with the pump upwards and disconnect the hose from the electric pump.
7. Drain the remaining washer fluid from the reservoir.
Installation
We install the tank in the reverse order of removal and fill it with washer fluid.