Removing
1. Disconnect the wire terminal from the negative terminal of the battery (see "Preparing the car for maintenance and repair").
2. Disconnect the electrical connectors of the two wires from the switch terminals.
3. Open end wrench by 19 mm Loosen the plastic locknut on the switch.
4. Unscrew the switch from the brake pedal bracket by hand.
Installation
Install the brake light switch in reverse order.
After installing the switch, before connecting the wire connectors, adjust the position of the brake pedal (see "Free travel of the brake pedal - adjustment").
Warning! After connecting the wires, make sure that when you lightly press the brake pedal, the brake lights turn on. Otherwise, check the connection of the wires to the switch terminals or repeat the adjustment